Affordable Automation Course – Multipurpose Engineering & Industrial Automation
01927279281,01703980538,01726716343,01915834327
01927279281
imo icon

01703980538

Affordable Automation Course

BDT 10000

Industrial Automation & House Wiring

Class 1: MULTISTORED BUILDING WIRING ELECTRICAL EQUIPMENT NAME, AND DESIGN DISPLAYING FROM PROJECTOR.

Class 2 : NATIONAL BUILDING CODE RULES AND BUILDING WIRING PRACTICE WITH USING CHANGE OVER AND PROTECTIVE CIRCUIT BREAKER

Class 3 : INTRODUCTION TO INDUSTRIAL SWITCHES: PUSH BUTTON, SELECTOR, ROTARY, TOGGLE AUTO& MANUAL AND DISPLAYING FROM PROJECTOR.

Class 4 : OPERATING AND CONNECTION PROCEDURE OF SWITCHES DISPLAY FROM PROJECTOR.

Class 5 : DISPLAYING FIRE ALARM EQUIPMENT FROM PROJECTOR AND PRACTICAL PRACTICE.

Class 6: INDUSTRIAL MOTOR CONTROL MAGNETIC CONTACTOR TYPE, CAPACITY SELECTION, AND INTERNAL WIRING DIAGRAM DISPLAYING FROM PROJECTOR.

Class 7: DIAGRAM PREPARATION AND 3 PHASE LOAD RUN PRACTICE FROM NO/NC PUSH AND MAGNETIC CONTACTOR.

Class 8: DESIGNING, DRAWING, CONNECTION AND PROTECTION LOAD TEST PERFORMANCE PRACTICE FROM PROJECTOR.

Class 9: ON DELAY TIMING RELAY INTRODUCTION, VOLTAGE SELECTION, TIMING SELECTION AND INTERNAL WIRING REALIZATION FOR MOTOR STAR DELTA RUN.

Class 10: INDUSTRIAL MOTOR DELAY CONTROL CIRCUIT PRACTICAL PRACTICE BY ON DELAY TIMER.

Class 11: INDUSTRIAL MAGNETIC RELAY TYPE, VOLTAGE AND AMPERE SELECTION. INTERNAL WIRING IDENTIFICATION, SELECTION AS PER LOAD.

Class 12: MONITORING VARIOUS TYPE OF RELAY FROM PROJECTOR AND LOAD CONTROLLING CIRCUIT PRACTICAL PRACTICE.

Class 13: BENEFIT OF APPLICATION DELAY OFF TIMING RELAY ON GENERATOR AND FURNACE BOILER IN INDUSTRY.

Class 14: PRACTICAL PRACTICE OF INDUSTRIAL MOTOR DELAY OFF AND TROUBLE SHOOTING.

Class 15: DUEL/SEQUENTIAL TIMER APPLICATION AND INTERNAL WIRING IDENTIFICATION WITH TIME SETTING PROCEDURE.

Class 16: AUTO CONTROL TRAFFIC SIGNAL PRACTICAL PRACTICE BY SEQUENTIAL TIMER

Class 17: DOMESTIC WATER TANK AUTO CONTROL BY ELECTRICAL FLOAT SENSOR PRACTICAL PRACTICE AND ECONOMY CONNECTION PROCEDURE.

Class 18: AUTO TRANSFER SWITCH (ATS) BENEFIT, CONTROLLING PROCEDURE AND PRACTICAL PRACTICE FOR GENERATOR & REB.

Class 19: HUNTING PREVENTION AUTO TRANSFER SWITCH (ATS) CONTROLLING PROCEDURE AND PRACTICE BY APPLICATION WITH TIMER.

Class 20: INDUSTRIAL MOTOR REVERSE /FORWARD CONNECTION PRACTICAL PRACTICE.

Class 21: LOAD SELECTION, ITEM SELECTION AS PER MOTOR CAPACITY AND PRACTICE STAR-DELTA CONNECTION WITH 3 PHASE MOTOR.

VFD/ FREQUENCY INVERTER PROGRAMMING, CONNECTION, MOTOR RUN, TROUBLESHOOTING (1 BRANDS: MITSUBISHI)

Class 1: 1. INTRODUCTION TO VFD, TALK ABOUT ITS BENEFITS AND WHY WE SHOULD USE A VFD.

Class 2: 2. VFD HARDWIRE SELECTION PROCEDURE ACCORDING TO LOAD/MOTOR.

Class 3: CONNECTION PROCEDURE OF A MOTOR TO A VFD DEVICE.

Class 4: FAMILIARIZATION WITH VFD INTERNAL AND EXTERNAL MODE

Class 5: VFD EXTERNAL MODE WIRING ACCORDING TO VFD COMPANY MANUAL PRACTICAL PRACTICE

Class 6: FAMILIARIZATION WITH VFD OPERATION MODE SELECTION FOLLOWING VFD MANUAL.

Class 7: INTRODUCTION TO VFD PARAMETER SETTING ACCORDING TO VFD MANUAL.

Class 8. FAMILIARIAZATION WITH VFD FAULT FINDING AND TROUBLE SHOOTING.

PLC PROGRAMMING, CONNECTION & TROUBLESHOOTING (1 BRANDS: MITSUBISHI)

Class 1: INTRODUCTION TO PLC.

Class 2: DISCUSS ABOUT PLC INPUT ELEMENT

Class 3: DISCUSS ABOUT PLC OUTPUT ELEMENT

Class 4: DISCUSS ABOUT PLC INPUT MODULE / OUTPUT MODULE

Class 5: DISCUSS ABOUT PLC ADDRESSING.

Class 6: FAMILIARIZATION WITH VARIOUS PLC LANGUAGES

Class 7: BLOCK DIAGRAM OF PLC.

Class 8: FAMILIARIZATION WITH VARIOUS LADDER SYMBOL

Class 9: CONCEPT AND CONVERSION FROM ELECTRICAL DIAGRAM TO LADDER DIAGRAM

Class 10: BASIC CONCEPT OF PLC SOFTWARE & DATA CABLE

Class 11: OVERVIEW AND INSTALLATION OF VARIOUS PLC SOFTWARES

Class 12: LOAD CONTROLLING WITHOUT LATCHING PRACTICAL PRACTICE

Class 13: LOAD CONTROLLING WITH LATCHING PRACTICAL PRACTICE

Class 14: FAMILIARIZATION WITH INTERNAL AUXILIARY RELAY IN PLC

Class 15: COMPARISON BETWEEN GENERAL AUXILIARY RELAY AND BATTERY BACKED AUXILIARY RELAY

Class 16: STAR-DELTA CIRCUIT PRACTICAL PRACTICE IN PLC.

Class 17: PLC HARDWARE CONNECTION PRACTICAL PRACTICE.

Class 18: EDITING/READING AND COPYING LADDER FROM PLC USING USB CABLE PRACTICAL PRACTICE.

Class 19: WRITING AND TRANSFERRING LADDER LOGIC TO PLC USING USB CABLE PRACTICAL PRACTICE.

Class 20: PLC TROUBLESHOOTING PROCEDURE WITH LOAD.

Class 21: PLC ONLINE MONITORING AND TROUBLE SHOOTING PRACTICAL PRACTICE.

HUMAN MACHINE INTERFACE (HMI) PROGRAMMING, CONNECTION & LOAD CONTROLLING (1 Brand)

Class 1: INTRODUCTION TO HMI – UNDERSTANDING WIRING & INSTALLATION

Class 2: INTRODUCTION TO VARIOUS TYPES OF SWITCHES (MOMENTARY, MAINTAINED, SET, RESET ETC.)

Class 3: INTRODUCTION TO HMI DISPLAY ELEMENTS.

Class 4: INTRODUCTION TO NUMERIC DISPLAY FOR DISPLAYING NUMBER, COUNTS OR PRODUCTION & LOAD CONTROLLING PRACTICAL PRACTICE.

Class 5: LOAD CONTROLLING AND TIMER DISPLAY DESIGN IN HMI PRACTICAL PRACTICE.

Ready to get started?

Your class starts when you join! 6 days a week.

8AM – 1PM / 4PM – 8PM, Whenever you like.